Karen Computer Science-Youth Group
  What can we help for you?
 

Welcome from KCSYG help centre


 အခုတေလာ ေခတ္စားေနတဲ႔ g-talk virus . အဲဒါကိုုသတ္တဲ႔နည္းေလး online fri တစ္ေယာက္ ဆီကေနတဆင္႔ ရတဲ႔အတြက္ ထပ္ဆင္႔ လက္ဆင္႔ကမ္းေပးလိုက္ပါတယ္......

...... မွားႏွိပ္မိလို႔ အခက္အခဲျဖစ္ေနတဲ႔ fri မ်ားအတြက္ပါ။

အၾကာင္းေလးကေတာ့ Chrome.exe ဆိုတဲ့ ဂ်ီေတာ့ေတြမွာ သူအလိုလို စာေတြလိုက္ပို.တဲ့ ဗိုင္းရပ္ေလးကို သတ္မယ့္နည္းပါ။ ကဲစၾကပါစို.ဗ်ာ။

၁။ ေတြ.လား privateCam ဆိုတာ အဲဒီဗိုင္းရပ္ေပါ့။ လူဆိုးဆိုလည္းမမွားဘူးေပါ့။

သူ.ကို ကြၽန္ေတာ္တို. Run မိၿပီးသြားၿပီပဲထာပါေတာ့ ဆိုးႀကိဳးေတြကေတာ့ ဂ်ီေတာ့မွာ ကိုယ္ကစာေတြမရိုက္ပဲနဲ. သူဘာသာစာေတြ လိုက္ပို.တယ္။ သူပို.တာေတြကလည္း ဗိုင္းရပ္ျဖန္.တဲ့ လင့္ေတြေလ။ ေတာ္တန္ရံုသူငယ္ခ်င္းေတြကေတာ့ ငါ့ဆီကို ဗိုင္းရပ္ပို.တယ္ဆိုၿပီး အေခၚအေျပာမလုပ္ၾကေတာ့ဘူးေပါ့။

ၿပီေတာ့ Task manager ကိုေခၚလို.မရေအာင္ပိတ္ပလိုက္တယ္


Folder Option ကိုလည္းေဖ်ာက္ပစ္လိုက္တယ္ဗ်ာ။


ခုနက ေဒါင္းေလာ့လုပ္ထားတဲ့ ဗုိုင္းရပ္ဖိုင္ကိုလည္း ဖ်က္လို.မရေတာ့ဘူးဗ်။

ၿပီးေတာ့ Registry ကိုလည္းေခၚလို.မရေတာ့ဘူးဗ်။

အဲဒီေတာ့ ကြၽန္ေတာ္တို.လုပ္ရမယ္အပိုင္းေ လးေတြ စရေအာင္။ ေသခ်ာမွက္ေပေတာ့။
၁။ ပထမဦးဆံုး ကြန္ျပဴတာကို Restart ခ်လိုက္ပါ။ ျပန္တက္လာရင္။
၂။ Start => Run ထဲမွာ msconfig ဆိုၿပီးရိုက္။ ၿပီးေတာ့ Enter ေခါက္ပါ။


၃။ ေဟာေတြ.ပါၿပီ မွင္နီနဲ. ကြၽန္ေတာ္၀ုိင္းျပထားတာ chrome.exe ဆိုတဲ့ ဂ်ီေတာ့ အရႈပ္ထုပ္ဗိုင္းရပ္ပါပဲ။
ေလာေလာဆယ္ေတာ့ အဲဒီေဘာက္ေလးကို ခဏပိတ္ထားလိုက္ဦးဗ်ာ။


ကြၽန္ေတာ္တို.အရင္ဆံုး start=>Run ထဲမွာ secpol.msc လို.ရိုက္ၿပီး Enter ေခါက္။


Software Restriction Policies ေပၚမွာ ညာဘက္ကလစ္ႏွိပ္ၿပီး create new policies လုိ.ေျပာေပးပါ။


Additional Rules ဆိုတဲ.ေပၚမွာ Select မွက္ၿပီး ညာဘက္ အကြပ္ထဲက လြတ္တဲ့ တစ္ေနရာမွာ ညာဘက္ကလစ္လုပ္ၿပီး New Hash Rule… ဆိုတာကိုေရြးေပးပါ။


New Hash Rule ဆိုတဲ့ ေဘာက္ေလးေပၚလာၿပီဆိုရင္ Browse ကေနတဆင့္ ဗိုင္းရပ္ရွိေနတဲ့ လမ္းေၾကာင္းကို ေရြးေပးရပါမယ္။ အဲဒီ Chrome.exe ဆိုတဲ့ ဗိုင္းရပ္ကေတာ့ C:windows ေအာက္မွာလည္း ေနတက္သလို
C:windowssystem32 ေအာက္မွာလည္းေနတက္ပါတယ္။


အရင္ဆံုး c:windowssystem32 ေအာက္ကိုေရာက္ၿပီဆိုရင္ ေအာက္က File Name ဆိုတဲ့ ေနရာမွာ chrome.exe လို.ရိုက္ထည့္ေပးလုက္ပါ။ တကယ္လို.အဲဒီဖိုင္မရွိဘူးလို.စာ ေပၚလာရင္ c:windows ေအာက္ကို၀င္ File name ေနရာမွာ chrome.exe ဆိုၿပီး ထက္ရုိက္ပါ။


ေနာက္တခါ လြတ္ေနတဲ့ေနရာမွာ ညာဘက္ကလစ္ႏွိပ္ၿပီး New Path Rule လို.ေျပာေပးရပါမယ္။


ၿပီးရင္ Browse ကေနတဆင့္ ခုနကလိုပဲ c:windows ေအာက္မွာ နဲ. C:windowssystem32 ေအာက္မွာ chrome ကို ရွာၿပီး ေရြးၿပီး OK လို.ေျပာေပးရပါမယ္။


Hash ေကာ Path ေကာ သတ္မွက္ၿပီးသြားတဲ့ အခ်ိန္မွာ ေအာက္ကလိုမ်ိဳးျမင္ေတြ.ရပါမယ္။
ၿပီးရင္ Start => Run ထဲမွာ gpupdate လုိ.ရိုက္ၿပီး Enter ေခါက္ေပးရပါမယ္။


ၿပီးရင္ start => run ထဲမွာ notepad လို.ရုိက္ၿပီး နဳတ္ပတ္ကိုေခၚ ေအာက္ကလိုမ်ိုးစာေတြကို ကိုယ္ဘာသာရုိက္ထည့္ပါ။


ၿပီးရင္ File menu ကေန save လို.ေျပာ။ save in ေနရာမွာ Desktop ကိုေရြးထားလိုက္ေတာ့ ရွာရတာလြယ္တာေပါ့။ file name ေနရာမွာ a.bat လို.ေပးပါ။ ၿပီးရင္ေတာ့ save ေပါ့ေနာ္။


ဒါဆိုႏုတ္ပတ္ကိုပိတ္။ Desktop ေပၚမွာျမင္ေတြရမယ့္ Bat file ေလးပါ။


ၿပီးရင္ start=> run ထဲမွာ msconfig ဆိုၿပီးထက္ရုိက္ပါ။ ေပၚလာတဲ့ system configuration utility မွာ startup Tab ကိုသြားၿပီး chrome ဆိုတဲ့ ေနရာမွာ အမွန္ျခစ္ေလး ျဖဳတ္ေပးပါ။ ၿပီးရင္ Apply, OK ေပါ့.
Restart ခ်ခိုင္းရင္ Restart ခ်လိုက္ပါ။


၀င္းဒိုးျပန္တက္လာရင္ Don't show this massage or launch the system configuration utlity when window start ဆိုတဲေနရာမွာ အမွန္ျခစ္ေလး ထည့္ၿပီး အိုေကလို.ေျပာပါ။

ၿပီးရင္ေတာ့ ခုနက Desktop ေပၚမွာျမင္ရတဲ့ a.bat ဆိုတဲ့ ဖိုင္ေလးကို ကလစ္ႏွစ္ခ်က္နွိပ္ၿပီး Run လိုက္လို.ပါၿပီ။

၁၀ စက္ကန္. ေလာက္ Run ၿပီးသြာရင္ေတာ့ ကြန္ျပဴတာကို ေနာက္တခါ restart ခ်လိုက္ပါ။ ျပန္တက္လာရင္ေတာ့
အဲဒီ ဗို္င္းရပ္ ခ်ဳပ္ၿငိ္မ္းသြ ားပါၿပီ။

အဲဒီေတာ့ ဗိုင္းရပ္ပိတ္ထားတဲ့ တစ္ခ်ိဳ.ေနရာေတြကုိ ျပန္ဖြင့္ၾကရေအာင္။


Taskmanager ကိုျပန္ဖြင့္ဖို.ရာ start => run ထဲမွာ gpedit.msc လို.ရိုက္ၿပီး Enter ေခါက္။



အခုေအာက္ကပံုမွာ ျပထားတဲ့ အတိုင္း ၀င္ပါ Remove Task manager ေပၚက်ရင္ ကလစ္ႏွစ္ခ်က္နွိပ္ပါ။


Disabled ကိုေရြးၿပီး apply, Ok နဲ.ထြက္ပါ။ ဒါဆိုရင္ေတာ့ Task Manager ကိုျပန္ေခၚလို.ရသြားပါၿပီ။


ေနာက္တခါ Registry ေပ်ာက္တာ ျပန္ေခၚဖို.က ခုနက Group Policy ထဲမွာပဲ ေအာက္ကလမ္းေၾကာင္းအတိုင္းသြား
ညာဘက္ျခမ္းမွာ Prevent access to registry editing tools ေပၚမွာ ကလစ္နွစ္ခ်က္ႏွိပ္ပါ။


ၿပီးရင္ Enabled ကိုေရြးပါ။ Apply, Ok လို.ေျပာ


ခုနကအတိုင္းပဲ Prevent access to registry editing tools ေပၚမွာ ကလစ္နွစ္ျပန္ႏွိပ္ၿပီး ခုနက Enable လိုေျပာခဲ့တဲေနရာမွာ Not Configured ဆိုၿပီး ျပန္ေျပာင္းေပးရပါမယ္။

ဒါဆိုရင္ေတာ့ start => run ထဲမွာ regedit လို.ရိုက္ၿပီး Registry ကိုျပန္ေခၚလုိ.ရသြားပါၿပီ။

ေနာက္ဆံုးတစ္ခု folder option ကုိုျပန္ေခၚဖို.အတြက္ကေတာ့
Start => run ထဲမွာ regedit လို.ရိုက္ၿပီး Enter ေခါက္။
Registry editor ထဲေရာက္သြားရင္ ဒီလမ္းေၾကာင္းအတိုင္းသြား
HKEY_CURRENT USER => software=> Microsoft =>windows =>Currentversion => Polocies => explorer ေပၚမွာ select မွက္ၿပီး ညာဘက္ျခမ္းမွာ Nofolder Options ေပၚမွာ ကလစ္ႏွစ္ခ်က္ႏွိပ္ေပးပါ။


Value date ဆိုတဲ့ေနရာမွာ 1 ျဖစ္ေနတာကို 0 လို.ေျပာင္းၿပီး ok လို.ေျပာလိုက္ပါ။
ဒါဆိုရင္ေတာ့ folder Option ျပန္ေပၚလားတာ ေတြ.ရပါလိမ့္မယ္။

အားလံုးပဲအဆင္ေျပပါေစဗ်ာ....... ...............။ ပံုႏွင္႔တကြ လုပ္ၾကည့္ခ်င္တယ္ဆိုရင္ေတာ႔
http://www.myanmarhero.org/forum/viewtopic.php?f=8&t=120 အဲဒါေလးကို click လုပ္လိုက္ပါ........... ။ အဆင္ေျပပါေစ...။

မီးေျမေခြး ဘေရာက္ဇာကို အျမန္ႏႈန္း (၂ )
မီးေျမေခြး ဘေရာက္ဇာကေတာ့ ကၽြန္ေတာ့္ရဲ့ အသံုးျပဳမႈအေတြ႔အႀကံဳအရ အားလံုးထက္ သာလြန္ျပည့္စံုေကာင္းမြန္တဲ့ ဘေရာက္ဇာတစ္ခုပါပဲ။သူ႔မွာပါ၀င္

တဲ့ Feature ေတြကေတာ့ အံ့မခန္းျဖစ္ပါတယ္။

-Tab Key တစ္ခုႏွင့္ တစ္ခုကို လ်င္ျမန္လြယ္ကူ ဖြင့္/ပိတ္ အသံုးျပဳနိဳင္ျခင္း (Ctrl+T = New Tab)
-Pop up ၀င္းဒိုးမ်ားကို အလိုအေလ်ာက္ ပိတ္ပင္ေပးျခင္း
-ဂူးဂယ္ ရဲ့ ရွာေဖြေရးအင္ဂ်င္ ကိုရွာေဖြမႈ အဆင့္ျမွင့္ထားျခင္း
-မိမိကိုယ္ပိုင္ ေဒတာမ်ားကို လံုၿခံဳမႈအျပည့္အ၀ေပးျခင္း (စကား၀ွက္ ..စသည္)
-၀ဘ္ဆိုဒ္တစ္ခုအား ေရာက္ရွိပါက အလိုအေလ်ာက္စစ္ေဆးျခင္း ထည့္သြင္းထားမႈ
-အြန္လိုင္းေပၚမွာပင္ Spell Checking ကို ဘာသာစကားအမ်ိဳးမ်ိဳးျဖင့္ အသံုးျပဳနိဳင္ျခင္း
-ေနာက္ သူ႔ရဲ့ Themes ေတြ၊ Interface ေတြနဲ႔ မိမိလိုရင္လိုသလို Extension/Addons ေတြကိုပါထည့္သြင္း အသံုးျပဳနိဳင္ျခင္း စတာေတြပဲ ျဖစ္ပါတယ္။

ေအာက္ပါ Operating System မ်ားကို မီးေျမေခြးမွ တရား၀င္ Support လုပ္ထားပါတယ္။

- Microsoft Window
- Linux
- Mac OS X

တရား၀င္မဟုတ္ေသာ္လည္း ေအာက္ပါ System မ်ား မွာပါ မီးေျမေခြးကို အသံုးျပဳနိဳင္ပါတယ္။

-Free BSD
-OS/2
-Solaris
-SkyOS
-BeOS
-XP Professional x64 Edition

ကဲ…အားလံုးရဲ့ မီးေျမေခြးေတြကို အျမန္ႏႈန္း(၂ )ဆ တင္ၿပီးေျပးခိုင္းဖို႔အတြက္ ေအာက္ပါ နည္းလမ္းေလးေတြ နဲ႔ စလိုက္ၾကရေအာင္။

၁) Address Bar ထဲမွာ about:config ကိုရိုက္ထည့္ပါ။ Enter ေခါက္ပါ။

၂) filter search bar ထဲမွာ network.http.pipelining ကိုရိုက္ထည့္ၿပီးရွာပါ။ Value Field မွာ Double Click ေခါက္ၿပီး true အျဖစ္ေျပာင္းလဲတပ္ဆင္ပါ။

၃) Filter search bar ကိုျပန္သြားပါ။ network.http.pipelining.maxrequests ကို ထပ္ရွာပါ။ ဒီ Option ေပၚမွာ Double click ေပးပါ။ တန္ဖိုးကို 8 - ေျပာင္းပါ။

၄)network.http.proxy.pipelining အားထပ္ရွာပါ။ Double Click ေပးပါ။ တန္ဖိုးကို true ေျပာင္းပါ။

၅)Filter Search Bar ထဲမွာ network.dns.disableIPv6 ကိုရွာေဖြၿပီး Double Click ေပးျခင္းျဖင့္ value ကို true အျဖစ္ေျပာင္းပါ။

၆)CONTENT INTERRUPT PARSING

ဒီနည္းလမ္းကေတာ့ မီးေျမေခြးကို အသံုးျပဳေနရင္းနဲ႔ Application တစ္ခုခုေၾကာင့္ Page Loading ရုတ္တစ္ရက္ရပ္တန္႔ ျခင္းကို တုန္႔ျပန္မႈမွ ထိန္းခ်ဳပ္ရန္ျဖစ္ပါတယ္။

about:config window ရဲ့ မည္သည့္ေနရာမဆို Right Click (Apple user မ်ား - Ctrl+Click) ေပးပါ။ New မွတစ္ဆင့္ Boolean ကို ေရြးပါ။

ျပီးပါက New boolean value pop-up window ထဲမွာ content.interrupt.parsing ကိုတည့္ပါ။ Ok ေပးပါ။ New Boolean အတြက္ Value ကို True ကိုေရြးပါ။ Ok ေပးပါ။

၇) Page Loading လုပ္ေနစဥ္အတြင္း ၾကန္႔ၾကာမႈျဖစ္ေစသည့္ Rendering လုပ္ျခင္းအား အခ်ိန္အကန္႔အသတ္မရွိ တံု႔ျပန္မႈ မျဖစ္ေစရန္အတြက္ ေအာက္ပါအတိုင္းေဆာင္ရြက္နိဳင္ပါတယ္။

about:config window အတြင္းမွာပဲ Right Click ထပ္ေပးပါ။ pop-up menu မွတဆင့္ New ကိုေရြးပါ ၊ ထိုမွတဆင့္ Integer ကိုေရြးပါ။

New Integer Pop up menu အတြင္း content.max.tokenizing.timeကိုရိုက္ထည့္ပါ။ Ok ေပးပါ။ Value ကို 2250000 ထည့္ပါ။ Ok လုပ္ပါ။

၈)CONTENT NOTIFY INTERVAL

ဒါကေတာ့ စာမ်က္ႏွာ တစ္ခုႏွင့္တစ္ခု အကူး ေစာင့္ဆိုင္းခ်ိန္ အနည္းဆံုးျဖစ္ေစဖို႔ အသံုးျပဳပါတယ္။

about:config window ရဲ့ မည္သည့္ေနရာမွာမဆို Right Click ေပးပါ။ New ကိုေရြးပါ။ Integer ကိုေရြး Ok ေပးပါ။

content.notify.interval ကိုရိုက္ထည့္ပါ။ Ok ေပးပါ။Value ကို 750000 <ေပးပါ။ Ok လုပ္ပါ။ ၉)CONTENT NOTIFY ONTIMER

မိမိအသံုးျပဳၿပီးသား စာမ်က္ႏွာတစ္ခုကို ျပန္ေခၚရာမွာ ေစာင္႔ဆိုင္းခ်ိန္နည္းၿပီး ပိုမိုသြက္လက္စြာအလုပ္လုပ္ေစဖို႔ ျဖစ္ပါတယ္။

about:config window ရဲ့ မည္သည့္ေနရာမွာမဆို Right Click ေပးပါ။ New ကိုေရြးပါ။ Boolean ကိုေရြး Ok ေပးပါ။

content.notify.ontimer ကိုရိုက္ထည့္ပါ။ Ok ေပးပါ။ Value ကို true ေရြးၿပီး Ok ေပးပါ။

၁၀)NOTIFY BACKOFFCOUNT

timer-based reflows ေတြကို အျမင့္ဆံုး နံပါတ္အထိ ထိန္းခ်ဳပ္ရန္အတြက္ ဒီနည္းလမ္းကို သံုးပါတယ္။

about:config window ရဲ့ မည္သည့္ေနရာမွာမဆို Right Click ေပးပါ။ New ကိုေရြးပါ။ Integer ကိုေရြး Ok ေပးပါ။

content.notify.backoffcount ကိုရိုက္ၿပီး Ok ေပးပါ။ Value ကို 5 ေပးၿပီး Ok လုပ္ပါ။

၁၁)CONTENT SWITCH THRESHOLD

ဒါကေတာ့ ၀ဘ္စာမ်က္ႏွာတစ္ခုကေန ေဒတာေတြကို အလြဲအေျပာင္းလုပ္ရန္အတြက္ ၾကာျမင့္ခ်ိန္ကို အနည္းဆံုးျဖစ္ ေအာင္ေလ်ာ့ခ်ထားတာျဖစ္ပါတယ္။

about:configwindow ရဲ့ မည္သည့္ေနရာမွာမဆို Right Click ေပးပါ။ New ကိုေရြးပါ။ Integer ကိုေရြး Ok ေပးပါ။

content.switch.threshold ကိုရိုက္ထည့္ပါ။ Ok လုပ္ပါ။Value ကို 750000 ထည့္ၿပီး Ok လုပ္ပါ။

၁၂)NGLAYOUT INITIALPAINT DELAY

မီးေျမေခြးနဲ႔ ၀ဘ္စာမ်က္ႏွာေတြဖြင့္တိုင္းမွာ မိမိလိုအပ္တဲ့ စာမ်က္ႏွာမေရာက္မွီ အမွန္တစ္ကယ္မလိုအပ္တဲ့ ေဒတာေတြ အမ်ားအျပားကိုပါ မီးေျမေခြးက ေဒါင္းလုဒ္ခ်ေလ့ရွိပါတယ္။အဲဒီအတြက္ေစာင့္ဆိုင္းခ်ိန္ အနည္းဆံုးျဖစ္ေအာင္ ေအာက္ပါအတိုင္းလုပ္ေဆာင္ထားနိဳင္ပါတယ္။

about:config window ရဲ့ မည္သည့္ေနရာမွာမဆို Right Click ေပးပါ။ New ကိုေရြးပါ။ Integer ကိုေရြး Ok ေပးပါ။

nglayout.initialpaint.delay ကိုရိုက္ထည့္ၿပီး Ok လုပ္ပါ။ Value ကို 0 ထားပါ။ Ok ေပးပါ။

အထက္ပါနည္းလမ္းေတြကို အသံုးၿပဳျခင္းျဖင့္ မီးေျမေခြး(၂ ) ဆမက ျမန္သြားတာကေတာ့ ကၽြန္ေတာ့္ ကိုယ္ေတြ႔ပါပဲ။ စိတ္ပါ၀င္စားသူ မည္သူမဆို အထက္ပါနည္းလမ္းမ်ားအတိုင္းစမ္းသပ္ၾကည့္နိဳင္ပါတယ္ခင္ဗ်ား။

စာညြန္း။ ။ A post of grr from Warez-bb.org.


 


NTLDR is Missing.

 

Issue:

NTLDR is Missing.

 

Related errors:

 

Below are the full error messages that may be seen when the computer is booting.

 

NTLDR is Missing
Press any key to restart

 

Boot: Couldn't find NTLDR
Please insert another disk

 

NTLDR is missing
Press Ctrl Alt Del to Restart

 

Cause:

  1. Computer is booting from a non-bootable source.
  2. Computer hard disk drive is not properly setup in BIOS.
  3. Corrupt NTLDR and/or NTDETECT.COM file.
  4. Misconfiguration with the boot.ini file.
  5. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
  6. New hard disk drive being added.
  7. Corrupt boot sector / master boot record.
  8. Seriously corrupted version of Windows 2000 or Windows XP.
  9. Loose or Faulty IDE/EIDE hard disk drive cable.

Solutions:

 

Computer is booting from a non-bootable source

 

Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM. First verify that no floppy diskette is in the computer, unless you are attempting to boot from a diskette.

 

If you are attempting to boot from a floppy diskette and are receiving this error message it is likely that the diskette does not have all the necessary files and/or is corrupt.

 

If you are attempting to install Windows XP or Windows 2000 and are receiving this error message as the computer is booting verify that your computer BIOS has the proper boot settings. For example, if you are attempting to run the install from the CD-ROM make sure the CD-ROM is the first boot device, and not the hard disk drive.

 

Second, when the computer is booting you should receive the below prompt. 

 

Press any key to boot from the CD

 

Important: When you see this message press any key such as the Enter key immediately, otherwise it will try booting from the hard drive and likely get the NTLDR error again.

 

Note: If you are not receiving the above message and your BIOS boot options are set properly it's also possible that your CD-ROM drive may not be booting from the CD-ROM properly. Verify the jumpers are set properly on the CD-ROM drive. Additional information about checking the CD-ROM drive connections can be found on document CH000213

 

Additional information: This error has also been known to occur when a memory stick is in a card reader and the computer is attempting to boot from it. If you have any type of card reader or flash reader make sure that no memory stick is inside the computer.  

 

Computer hard disk drive is not properly setup in BIOS

 

Verify that your computer hard disk drive is properly setup in the BIOS / CMOS setup. Improper settings can cause this error. Additional information on how to enter the BIOS / CMOS setup can be found in document CH000192

 

Corrupt NTLDR and/or NTDETECT.COM file

 

Windows 2000 users
Windows XP users

 

Windows 2000 users

 

If your computer is using Microsoft Windows 2000 and you are encountering the NTLDR error. Create the below boot.ini file on the floppy diskette drive.

 

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINNT="Microsoft Windows 2000 Professional" /fastdetect

 

Copy the NTLDR and NTDETECT.COM files from another computer using the same Operating System. Both of these files are located in the root directory of the primary hard disk drive. For example, C:NTLDR and C:NTDETECT.COM should be the locations of these files on many computers.

  • Please keep in mind that these files are hidden system files, if you need additional help with viewing hidden files in Windows please see document CH000516

Once these files have been copied to a floppy diskette reboot the computer and copy the NTLDR and NTDETECT.COM files to the root directory of the primary hard disk drive. Below is an example of what commonly should be performed from the A:> drive.

 

copy ntldr c:
copy ntdetect.com c:

 

After the above two files have been copied, remove the floppy diskette and reboot the computer. 

 

Windows XP users

  1. Insert the Windows XP bootable CD into the computer.
  2. When prompted to press any key to boot from the CD, press any key.
  3. Once in the Windows XP setup menu press the "R" key to repair Windows.
  4. Log into your Windows installation by pressing the "1" key and pressing enter.
  5. You will then be prompted for your administrator password, enter that password.
  6. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter, which in this case is "e." This letter may be different on your computer.

    copy e:i386ntldr c:
    copy e:i386ntdetect.com c:
  7. Once both of these files have been successfully copied, remove the CD from the computer and reboot.

Misconfiguration with the boot.ini file

 

Edit the boot.ini on the root directory of the hard disk drive and verify that it is pointing to the correct location of your Windows Operating System and that the partitions are properly defined. Additional information about the boot.ini can be found on document CH000492.

 

Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32

 

If you are getting this error message while you are attempting to upgrade to Windows 2000 or Windows XP from Windows 95, Windows 98, or Windows ME running FAT32 please try the below recommendations.

  1. Boot the computer with a Windows 95, Windows 98 or Windows ME bootable diskette.
  2. At the A:> prompt type:

    sys c: <press enter>
  3. After pressing enter you should receive the "System Transferred" message. Once this has been completed remove the floppy diskette and reboot the computer.

New hard disk drive being added

 

If you are attempting to add a new hard disk drive to the computer make sure that drive is a blank drive. Adding a new hard disk drive to a computer that already has Windows installed on it may cause the NTLDR error to occur.

 

If you are unsure if the new drive is blank or not try booting from a bootable diskette and format the new hard disk drive.

 

Corrupt boot sector / master boot record

 

It's possible your computer's hard disk drive may have a corrupt boot sector and/or master boot record. These can be repaired through the Microsoft Windows Recovery console by running the fixboot and fixmbr commands.

 

Additional information and help in getting into the Microsoft Windows Recovery console can be found on document CH000627.

 

Seriously corrupted version of Windows 2000 or Windows XP

 

If you have tried each of the above recommendations that apply to your situation and you continue to experience this issue it is possible you may have a seriously corrupted version of Microsoft Windows. Therefore we would recommend you reinstall Microsoft Windows 2000 and Windows XP.

 

If you are encountering this issue during your setup you may wish to completely erase your computer hard disk drive and all of its existing data and then install Microsoft Windows 2000 / Windows XP. Additional information about erasing the computer and starting over can be found on document CH000186.

 

Loose or Faulty IDE/EIDE hard disk drive cable

 

This issue has been known to be caused by a loose or fault IDE/EIDE cable. If the above recommendation does not resolve your issue and your computer hard disk drive is using an IDE or EIDE interface. Verify the computer hard disk drive cable is firmly connected by disconnected and reconnecting the cable. 

 

If the issue continues it is also a possibility that the computer has a faulty cable, try replacing the hard disk drive cable with another cable and/or a new cable. 

 

Additional information:


My computer is running slow what steps can I do to fix it?

 

Issue:

My computer is running slow what steps can I do to fix it?

 

Cause:

This issue can be caused by any of the below possibilities.

  1. Hard disk drive is short on available disk space.
  2. Several software programs have been installed/uninstalled leaving behind bad files and/or confusing the software.
  3. Data Corruption.
  4. Computer is overheating.
  5. Bad Hardware.

Additional information:

 

If your Internet is slow this document does not contain information about this issue. See document CH000986 for additional information about why your Internet connection may be slow.

 

PC Solution:

 

Below are steps for Microsoft Windows that should help speed up the computer or determine why the computer is running slow.

Not enough hard disk drive space

 

If you have a hard disk drive that is 2GB or smaller, ensure that there is at least 200MB of hard disk drive space free. If you have a hard drive larger than this size, verify that there is at least 500MB of free hard disk space. This available space allows the computer to have room for the swap file to increase in size as well as room for temporary files. See document CH000528 for additional information about regaining lost hard disk drive space.

 

Hard drive corrupted or fragmented

 

Run Scandisk or something equivalent to help ensure that there is nothing physically wrong with the computer hard disk drive.

 

Run Defrag to help ensure that data is arranged in the best possible order.

 

Background programs

 

Remove or disable any TSRs or programs that automatically start each time the computer boots. See document CHTSR for additional information.

 

Hardware conflicts

 

Verify that the Device Manager has no conflicts, but if conflicts are present, resolve them.

 

Issues with Windows XP prefetch

 

If you have Windows XP try deleting all files in the prefetch directory. These are prefetch files and can lower system resources if loading programs no longer being used. See our prefetch definition for additional information about prefetch.

 

Issues in Windows 95 / 98 autoexec.bat / config.sys

 

If you are using Microsoft Windows 95 or Windows 98 and do not plan on running any MS-DOS programs from MS-DOS follow the below steps.

  1. Click Start, Run and type command and press enter.
  2. In the MS-DOS window type cd to get to C:> and then type ren autoexec.bat autoexec.ch and ren config.sys config.ch

This will rename your autoexec.bat and config.sys and help make sure memory is being optimized through Windows.

 

Computer or processor is overheating

 

Make sure your computer and processor is not overheating, excessive heat can cause a significant decrease in computer performance some processors will even lower the speed of the processor automatically to help compensate for the heat related issues. Additional information about your processor temperature and was of determining how hot it is can be found on document CH000687.

 

Specific operating system basic troubleshooting

 

Try running through the basic troubleshooting steps for your operating system.

 

Erase computer and start over

 

 Finally, if none of the above solutions resolve your issues, it is recommended that you either reinstall Windows and/or erase everything and then start over. Additional information about how to do this can be found on document CH000186.

Hardware issues

 

If your computer continues to be slow after going over each of the above recommendations it's possible that your computer is experiencing a more serious hardware related issue such as a failing component in the computer. This could be a failing or bad CPU, RAM, Motherboard, or other component.



ပညာေရးဆိုင္ရာ Web နွင္ ့ Blog မ်ား

ပညာေရးနဲ ့ပတ္သက္ေသာ ဆိုက္နွင္ ့ဘေလာ ့ေတြကို သိသေလာက္ တင္လိုက္ပါတယ္။ ေတာ္ေတာ္မ်ားမ်ားက သိၿပီးသားေတြၿဖစ္ဖို ့မ်ားပါတယ္။ တခ်ဳိ ့ဆိုက္ေတြလဲက်န္ေကာင္း က်န္နုိင္ပါတယ္။ သိတဲ ့သူမ်ား ဆက္လက္မွ်ေဝ ေပးေစလိုပါတယ္။

www.myanm arenginee r.org

www.mymet roworld.o rg

www.engin eer4myanm ar.com

http://educationinmyanmar.blogspot.com/

http://mmwordpress.com

http://www.worldpressmyanmar.com/

http://www.technical-seven.com/

http://autocaddrawing.blogspot.com



ONLINE uae pmoifMur,f...

Open Course Ware

Here is link for MIT OCW
http://ocw.mit.edu/index.html
Here is Japanese Universit ies' OCW
http://www.jocw.jp/Members.htm[/FONT]]http://www.jocw.jp/Members.htm



အဂၤလိပ္စာ ေလ့လာလိုသူမ်ားအတြက္  www.engli sh4myanma r.com


http://www.about.com
vdkcsifwm? odcsifwm awmfawmfrsm;rsm;udk &SmazG,lEdkifwJh qdk'fwpfckyg/ wu,fvdkY &kyf&SifeJY ywfowfvdkYtjrJwrf; tyf'dwfawGudkodcsif&if wpfywfwpfcgydkYay;wJh owif;pmudk oifh&JUtD;ar;vfrSwpfqifh &,lEdkifygw,f/ t*Fvdyfpm? *syefpm.. pwJh bmompum;? [if;csufenf;? tm;upm;.... tpHkyg0ifygw,f/

Computer rsm; application awG Run wmMumvm&ifaES;vmwufygw,f.. tJcgrSm omreftm;jzifh uGefysLwmawGudk &Dpwuf csMuygw,f   tck 'D trick av;uawmh &dk;&dk;av;ygbJ...... prf;MunfYMurvm; ....... prf;r,fqkd&ifawmh
Desktop  ay:rSm  Right click> New>Short cut> ay;NyD;awmh Tyep the location of the item ae&mrSm  %windir%system32rundll32.exe advapi32.dll,ProcessIdleTasks
qdkwmudk aumfyDul;xnfYvkdufyg..aemuf Next vkyfNyD;awmh emrnfudk clear memory vkdYay;vkdufaygh aemf...... t[J... 'gygbJcifAsm


tck usaemf Jet Audio wifay;oGm;ygr,fJetAudio 7 plus version yg olYudk'Dtwdkif;tifpawmvkyfvkdYr&ygbl;...(usaemfrodwmvnf;jzpfaumif;jzpfr,f) olYudktifpawmvkyfcsif&if t&ifqHk; jet Audio version 6 basic udk tifpawmvkyf&ygw,f... tJ'gudktifpawmNyD;&if atmufu[mudk qufNyD;awmh tifpawmvkyfyg
http://www.zshare.net/download/1021484024d651a1/
NyD;NyDqdk&ifawmh jet audio version 7 plus udk at;at;aq;aq; tifpawmvkyfEkdifygNyD... yav,mawGxJrSmawmh odyfMudKufwJYyav,mayghAsm........ olYudkzGifYxm;NyD; Time or alarm ay;xm;vkdY&w,f... tdyf&if;eJY em;axmifrvm; Time ay;xm;vdkuf..wpfem&DMum&if window Shutdown vkyfygvdkY ay;xm;vdkuf&if tdkauNyD.......

Jet_Audio_7_Plus


tifwmeufeJYcsdwfqufxm;wJYuGefjyLwmawGrSm 0if;'dk;rD'D,m 11 wdkY 0if;'dk;udk tyf*&dwfvkyfwmwdkY vkyfcsif&if 0if;'dk;u *sif;nL;&if; (Genuine)jzpfrS &rSmyg.. tJ'dawmh usaemfwdkYu ydkufydkufrwwfEdkifawmh 0if;'dk; awGudk0,froHk;Edkifygbl;.. 0,froHk;orQawmh tppf&rSmr[kwfygbl;... twkudk bJ tppfvdkjzpfatmifvkyfckdif;&rSm ayghaemf... tJ'dvkdawmh ckeu 0if;'dk;rD'D,m 11 wdkY tdkiftD; 7 wdkY bmwkdYoGif;cgeD;us&if... atmufu aqmzhf0Jav;udk t&if RUN vdkuf ...... NyD;rSm rD'D,m 11 wdkY tdkiftD; 7wdkY tifpawmayghaemf......

http://www.zshare.net/download/9572541ea8ae5a/
 
t&ifqHk; a'gif;vdkufyg...NyD;&if rar file wpfck&vmygvdrfhr,f..jznfcsvdkuf&if zkdif 7ck &vmygvdrfhr,f... tJ'dxJu Installer qdkwJY[mudk uvpfESpfcsufESdyfvdkufyg... dos window wpfckay:vmvdrhfr,f.. a&SYqufzkdY MudKufwYJuD;wpfck ESdyfygvdkY t*Fvdyfvdkar;&if...... uD;bkwfay:u MudKufwJYuD;wpfck ESdyfvdkufyg.. tJvdkESpfcgar;ygvdrfhr,f...  yD;oGm;yDqdk&ifawmh... pufoGm;yHk av; (LegitCheckControl.dll and Wgalogon.dll) ESpfckudk aumfyDvkyfyD;awmh c:windowssystem32 atmufudk aumfyDul;xnfYvdkufyg... Replace vkyfrvm;qdk&if Yes ay;vdkufyg....'gqdkyD;ygyD.......aemuf0if;'dk; topfrwifrcsif;....ckeuvdk *sef;EsL;&if; vdkwJY [mawGudktifpawmr,fqdk&if..... Installer wpfckwnf; Run &if&ygNyD....aumfyDvkyfwJYudwfp rvdkawmhygbl;...
tm;vHk;bJ tqifajyMuygap

window login အတြက္ အလြယ္ကူဆံုးတစ္ခုကို က်ေနာ္ေျပာခ်င္ပါတယ္
အဲ့ဒါကေတာ့ က်ေနာ္တုိ႔ ရဲ႕ login password ေမ့သြားခဲ့ရင္ အသံုးတဲ့မယ္ထင္ပါတယ္ ... (For Win XP - SP2)
လုပ္ရမွာက -
ူlogin တက္လာတဲ့အခါမွာ Ctrl+Alt+Delete ကို ႏွစ္ႀကိမ္ ႏွိပ္လိုက္ပါ။
အသစ္ပြင့္လာတဲ့ user name ျဖည့္တဲ့အကြက္မွာ "Administrator" ကိုရိုက္ၿပီး password အကြက္မွာ မျဖည့္ပဲ
Enter ႏွိပ္လိုက္ရင္ window ဟာ Administrator account နဲ႕ တက္လာပါလိမ့္မယ္ ...

အဲ့ဒီအခါက်မွ password ျပန္ရွာတဲ့ software တစ္ခုခုနဲ႕ ေမ့ေနတဲ့ password ကိုျပန္ရွာလိုက္မယ္ဆိုရင္ ........
ဟုတ္ကဲ့.. အဲ့ဒါကေတာ့.. ၀င္းဒိုးစတင္တဲ့အခါမွာ အက္ဒမင္ပတ္စေ၀ါ့မထည့္ခဲ့ရင္ေတာ့ ရႏိုင္တာေပါ့ဗ်ာ.. ထည့္ခဲ့ရင္ေတာ့ ဒီနည္းနဲ႔မရႏိုင္ေတာ့ပါဘူး...

ကဲ.. မထည့္ခဲ့ဘူးဆိုပါေတာ့...
Administrator Account နဲ႔ ၀င္းဒိုးတက္လာလို႔ တျခားအေကာင့္ေတြရဲ႕ password ျပန္ေျပာင္းခ်င္ရင္.. ပ႐ုိဂရမ္မလိုတဲ့နည္းပါ....

- Start Button ကိုကလစ္လုပ္လိုက္ပါ။
- My Computer ကိုလိုက္ရွာၿပီး Right Click လုပ္လိုက္ပါ။ (Desktop ေပၚမွာ My Computer ရွိရင္ေတာ့ တစ္ခါထဲ Right Click လုပ္လိုက္႐ုံပါပဲ)
- Right Click လုပ္လို႔ ေဘာက္ေလးေပၚလာရင္ Manage (ေလးခုေျမာက္မွာရွိတတ္ပါတယ္) ကိုေရြးလိုက္ပါ။
- Computer Management ဆိုတဲ့ေဘာက္ေပၚလာရင္ Local Users and Groups > User ကိုေရြးလိုက္ပါ။
- အဲ့ဒီမွာ password ျပန္ခ်ိန္းခ်င္တဲ့ User ကို Right Click လုပ္၊ Set Password ကိုေရြး Proceed ကိုႏွိပ္ၿပီး Password ကိုထည့္လို႔ရပါၿပီဗ်ာ....


Domain name:
  (eg. iwebtool.com)
 

Powered by iWEBTOOL


If you want to know a website's speed(bandwidth) , you can fill the following box and you can know its loading time and it speed

 

Your domain(s): Enter each address on a new line (Maximum 10)
 
(eg. www.kcsyg.tk)    
 

Powered by iWEBTOOL



--------------------

If you have difficulties in Computer Hardware, Software, Internet  and other IT error, you can ask us by mailing to may.mark.july12@gmail.com and asking at Contact link.



Inset a Search Box

Blog Sidebar မွာ မိမိ Blog အတြင္း ရွာေဖြေပးတဲ့ Search Box ကေလး ထည့္ခ်င္ပါတယ္ ဆိုရင္ေတာ့ ေအာက္ပါ အတိုင္း လုပ္ေဆာင္ေပးရပါလိမ့္မယ္ -
(၁) သင့္ Blog ကိုမွာ Sign in လုပ္ၿပီး Template tab ကိုသြားပါ။
(၂) Page Elements tab ကို ေရြးျခယ္ပါ။
(၃) "Add a page Elements" ကို Click တစ္ခ်က္ႏွိပ္လိုက္ပါ။
(၄) “HTML/JavaScript"ကို ဆက္လက္ ေရြးျခယ္ပါ။
(၅) "HTML/JavaScript" ထဲတြင္ ေအာက္ပါ code မ်ားအား ထည့္သြင္းကာ Save လုပ္လိုက္ပါ
<p align="left"><form id="searchthis" action="YOUR BLOG URL/search" style="display:inline;" method="get"><strong>This is your Tittle<br/></strong><input id="b-query" maxlength="255" name="q" size="20" type="text"><input id="b-searchbtn" value="Search" type="submit"></form></p>

ထိုသို႔ထည့္သြင္းရာတြင္ ဒုတိယ စာေၾကာင္းမွာပါတဲ့ action="YOUR BLOG URL/search" ဆိုေသာ ေနရာတြင္ ကၽြန္ေတာ္ အနီျပထားေသာ YOUR BLOG URL ေနရာမွာ သင့္ရဲ႕ Blog လိပ္စာကို ထည့္သြင္းပါ။ ဥပမာအား ျဖင့္ ကၽြန္ေတာ့္ Blog ဆိုလွ်င္ action="http://aclmdy.blogspot.com/search" ဟု ျဖစ္သြား ပါမည္။
၄င္းေနာက္ (၄)ေၾကာင္းေျမာက္တြင္ပါေသာ This is your Tittle ဆိုေသာေနရာတြင္ သင္ထည့္လိုေသာ ေခါင္းစဥ္ကိုထည့္သြင္းပါ။ ေအာက္ပါအတိုင္းျဖစ္သြားပါမည္။

My Blog Search Box

အလွ်ားကို ခ်ဲ႕/ခ်ံဳ႕ ျပဳလုပ္ခ်င္ေသးပါက (၆)ေၾကာင္းေျမာက္ရွိ maxlength="255" ဆိုေသာေနရာတြင္ 255 အစား မိမိ လိုသေလာက္ကို ခ်ဲ႕/ခ်ံဳ႕ ျပဳလုပ္ႏိုင္ပါတယ္။ ဥပမာ maxlength="500"
ေနာက္ဆံုးတစ္ခုကေတာ့ Search ဆိုတဲ့ အတံုးေလးကို စာသားျပင္ခ်င္ပါက Value="Search" ေနရာမွ Search အစားမိမိထည့္သြင္းလိုေသာ စားလံုးကို ျပင္ေရးလိုက္ပါ။ ဥပမာ Value="Go"
ယခုဆိုလွ်င္ သင့္ Blog မွာ Blog ထဲမွ အေၾကာင္းအရာမ်ားကို ရွာေပးမယ့္။ Search Box ေလးတစ္ခု တင့္တင့္ တယ္တယ္ ေရာက္ရွိသြားမွာျဖစ္ပါတယ္။ အဆင္မေျပတာရွိရင္ အႀကံျပဳခဲ့ၾကပါဦးလားဗ်ာ

Run Command

အပ်င္းႀကီးတယ္ပဲေျပာမလား။ လူထင္ႀကီးေအာင္လုပ္တယ္ပဲ ေျပာရမလားေပါ့ဗ်ာ။ ကြန္ပ်ဴတာကိုင္ၿပီ ဆိုတာနဲ႕ Mouse မကိုင္ခ်င္တဲ့ ၀ါသနာပါသူမ်ား ကို Run Command ေလးမ်ား မွတ္သားထားသေလာက္ ေ၀မွ်ခဲ့ ခ်င္ပါတယ္။ Run Command Dialog Box ထဲမွာ စာသားေလး နည္းနည္း ရိုက္ထည့္ ၿပီးရင္ Enter ေခါက္လိုက္ Window ေလးေတြ တစ္ခုၿပီး တစ္ခုက်လာ။ အဲ့ဒါမ်ိဳးကို ကၽြန္ေတာ္အလြန္သေဘာက်တာဗ်။ Run Command Dialog Box ကို Start ေအာက္က Run. . ကိုႏွိပ္ၿပီးေခၚရပါတယ္။ အဲ့ဒါေတာင္ပ်င္းေနေသးလို႔ ငပ်င္းနည္းထပ္သံုး လိုက္ေသးတယ္။ ကဲစလုပ္ၾကည့္ရေအာင္။ Win Key ကိုသိတယ္ေနာ္ Ctrl Key နဲ႕ Alt Key ၾကားမွာ ရွိတဲ့ Window logo ေလးနဲ႕ Key ကိုေျပာတာပါ။ Win Key + R ကိုႏွိပ္လိုက္ Run Command Dialog Box က်လာလိမ့္မယ္ အကြက္ထဲမွာ control လို႔ ရိုက္ထည့္လိုက္ ၿပီးရင္ Enter ေခါက္လိုက္ Control Panel ကို တစ္ခါတည္းေရာက္သြားေရာဗ်ာ။ အဆင္မေျပဘူးလား။ အဲ့လို႔ ျမန္ျမန္ဆန္ဆန္ဆို - ဒါ့ေၾကာင့္ ကၽြန္ေတာ္ Run Command ေလးေတြ မွတ္သားထားသေလာက္ကို ေအာက္ပါအတိုင္း ေ၀မွ်လိုက္ပါတယ္။
(1) Window System ပိုင္းနဲ႕ပါတ္သက္လို႔ ကေတာ့ -

အေၾကာင္းအရာ

Run Command

Administrative Tools

control admintools

Check Disk Utility

chkdsk

Command Prompt

cmd

Control Panel

control

Mouse Properties

control mouse

Keyboard Properties

control keyboard

Display Properties

control desktop

Dievice Manager

devmgmt.msc

Grop Policy Editor

gpedit.msc

Performance Monitor

perfmon

Printers Folder

printers

Registry Editor

regedit

System Configuration Editor

sysedit

System Configuration Utility

msconfig

System Information

msinfo32

System Properties

sysdm.cpl

Task Manager

taskmgr

Computer Management

compmgmt.msc

Data Source (ODBC)

odbcad32

Event Viewer

eventvwr

Local Security Settings

secpol.msc

Services

services.msc

Back Up

ntbackup

Disk Cleanup

cleanmgr

Disk Defragmenter

dfrg.msc

Character Map

charmap


(2) Appalication ပိုင္းနဲ႕ပါတ္သက္လို႔ ကေတာ့ -

အေၾကာင္းအရာ

Run Command

Internet Explorer

iexplore

Microsoft Paint

mspaint

Microsoft Word

winword

Microsoft Excel

excel

Microsoft Power Point

powerpnt

Microsoft Outlook

outlook

Outlook Express

msimn

Microsoft Office Picture Manager

ois

CyberLink Power DVD

powerdvd

Windows Movies Maker

moviemk

Windows Media Player

wmplayer

JetAudio

jetaudio

Nero Express

nero

Mozzila Fire Fox

firefox

Adobe Photoshop

photoshop

Adobe Pagemaker 7.0

pm70

Adobe ImageReady

ImageReady

Note Pad

notepad

Word Pad

wordpad

Calculator

calc


Run Command ေလးေတြရိုက္ၿပီး လုပ္ငန္းေတြ ျမန္ဆန္စြာ ေဆာင္ရြက္ကာ ေပ်ာ္ရြင္ႏိုင္ၾကပါေစလို႔ . . ဆုေတာင္းေပးလိုက္ပါတယ္။

Important Warning!

Now Happy birthday virus is spreading widely.So be careful your computers.It can detech from Internet and Flash disk(Memory stick, MP3,MP4 players).It can damage WINDOWS startup Files.if it have entered into your computer, you computer cannot startup.Its appearance is like that
NDTRL is missing
press Ctrl+Alt+Del to restart

There is no anti-virus software to prevent it.
If your computer is  damaged by this virus , pls contact us (sawminlatt@gmail.com)
We will help you.

Free Download Karen Fonts

Sagaw Karen Font
Pwo Karen Font 
Help-1-----if you cannot send E-mail with large attachment file , this website will solve your need

www.send6.com


 

Help-2-----If you cannot access some webs, this prosy websites will help you.

www.iwantsurf.com
www.ibypass.com

www.mmproxy.com


Help-3-----This site is a stroage place for your favourite music, photo, video, friend's data, calender and your important data..


Help-4----If you have a problem to download the Anitivirus Defination Update , You can download this following Links

For Nortan Antivirus        ----    Download here(last update)

For Kaspersky Antivirus
  ----    Download here(last update)
For AVG Antivirus
           ----    Download here(last update)                                                                                                      Download here(last update)
                                                  
Download here(last update)
                                                   Download here(last update)   
                                          


Help-5----If you have a problem to write your CV and Cover Letter , you can contact with us bu this link ..sawminlatt@gmail.com


Help-6----If you would like to create a free email account, Use this mail





 

 

 
  Today, there have been 2 visitors (6 hits) on this page!  
 
This website was created for free with Own-Free-Website.com. Would you also like to have your own website?
Sign up for free